EasyManuals Logo

H3C S7500E Series Command Reference

H3C S7500E Series
368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
2-12
Field Description
Role
Role of the OLT port in the backup group:
MASTER: master port
SLAVE: slave port
State
OLT port state:
ACTIVE: The master port is active (the chip is active and the
optical module is plugged in).
READY: The slave port is ready and a master-slave switchover
can be performed.
DOWN: Any other condition.
display onu-event interface
Syntax
display onu-event interface interface-type interface-number
View
Any view
Default Level
2: System level
Parameters
interface-type: Port type. It is ONU.
interface-number: ONU port number.
Description
Use the display onu-event interface command to display the registration and deregistration records
of an ONU.
The system supports up to 50 records for each ONU. After the number of records for an ONU
reaches this maximum number, the old records will be overwritten by the new ones.
If an ONU port is unbound from its ONU or the EPON card is reset, records will be cleared.
Examples
# Display the registration and deregistration information of the ONU.
<Sysname> display onu-event interface onu 3/0/1:1
Date Time ONU Event ONU Status
2007/07/28 13:57:03 Registration Down
2007/07/28 18:00:06 Deregistration Up

Table of Contents

Other manuals for H3C S7500E Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S7500E Series and is the answer not in the manual?

H3C S7500E Series Specifications

General IconGeneral
BrandH3C
ModelS7500E Series
CategorySwitch
LanguageEnglish

Related product manuals