17-7
Examples
# Display the global GVRP enable/disable state.
<Sysname> display gvrp status
GVRP is enabled
display gvrp vlan-operation
Syntax
display gvrp vlan-operation interface interface-type interface-number [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default Level
0: Visit level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display gvrp vlan-operation command to display information about dynamic VLAN
operations on a port.
Examples
# Display information about dynamic VLAN operations on GigabitEthernet 2/0/1.
<Sysname> display gvrp vlan-operation interface GigabitEthernet 2/0/1
Dynamic VLAN operations on port GigabitEthernet2/0/1
Operations of creating VLAN : 2-100
Operations of deleting VLAN : none
Operations of adding VLAN to TRUNK : 2-100
Operations of deleting VLAN from TRUNK : none
garp timer hold
Syntax
garp timer hold timer-value
undo garp timer hold
To Next Page
Loading...
Need help?
General
