10-1
10 Port Isolation Configuration Commands
Port Isolation Configuration Commands
display port-isolate group
Syntax
display port-isolate group [ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display port-isolate group command to display information about isolation group 1.
The S7500E series switches support only one isolation group.
Examples
# Display information about isolation group 1.
<Sysname> display port-isolate group
Port-isolate group information:
Uplink port support: NO
Group ID: 1
Group members:
GigabitEthernet2/0/2
To Next Page
Loading...
Need help?
General
