H3C S7500E Series

13-8
name
Syntax
name text
undo name
View
VLAN view
Default Level
2: System level
Parameters
text: VLAN name, a string of 1 to 32 characters. Spaces and special characters can be included in the
name.
Description
Use the name command to configure a name for the current VLAN.
Use the undo name command to restore the default name of the VLAN.
The default name of a VLAN is its VLAN ID, VLAN 0001 for example.
When 802.1X or MAC address authentication is configured on a switch, you can use a RADIUS server
to issue VLAN configuration to ports that have passed the authentication. Some servers can send IDs
or names of the issued VLANs to the switch. When there are a large number of VLANs, you can use
VLAN names rather than VLAN IDs to better locate VLANs.
Examples
# Configure the name of VLAN 2 as test vlan.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] name test vlan
reset counters interface vlan-interface
Syntax
reset counters interface vlan-interface [ vlan-interface-id ]
View
User view
Default Level
2: System level
Parameters
vlan-interface-id: VLAN interface number.
Description
Use the reset counters interface vlan-interface command to clear the statistics on a VLAN interface.
Before collecting the traffic statistics within a specific period of time on an interface, you need to clear
the existing statistics first.