9-5
Description
Use the display lacp system-id command to display the system ID of the local system.
The system ID comprises the system LACP priority and the system MAC address.
You can use the lacp system-priority command to change the LACP priority of the local system.
When you do that, the LACP priority value you specify in the command is in decimal format. However,
it is displayed as a hexadecimal value with the display lacp system-id command.
Related commands: lacp system-priority.
Examples
# Display the local system ID.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 0000-fc00-6504
Table 9-2 display lacp system-id command output description
Field Description
Actor System ID: 0x8000,
0000-fc00-6504
The local system ID, which comprises the LACP system priority (0x8000
in this sample output) and the system MAC address (0000-fc00-6504 in
this sample output).
display link-aggregation load-sharing mode
Syntax
display link-aggregation load-sharing mode [ interface [ bridge-aggregation interface-number ] ]
[ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
bridge-aggregation: Displays the load sharing criterion or criteria of the aggregation group
corresponding to the specified Layer 2 aggregate interface.
interface-number: Specifies the number of an existing aggregate interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
To Next Page
Loading...
Need help?
General
