19-2
Examples
# Configure an outer VLAN tag for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] nest top-most vlan-id 100
remark customer-vlan-id
Syntax
remark customer-vlan-id vlan-id
undo remark customer-vlan-id
View
Traffic behavior view
Default Level
2: System level
Parameters
vlan-id: Customer VLAN (CVLAN) ID to be marked for packets, in the range of 1 to 4094.
Description
Use the remark customer-vlan-id command to configure the action of setting the specified CVLAN ID
for packets for the traffic behavior.
Use the undo remark customer-vlan-id command to remove the action.
Note that the action of setting the customer network VLAN ID cannot be applied to a VLAN or applied
globally.
Examples
# Create a traffic behavior named b1, and configure the action of marking packets with CVLAN ID 111
for the traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior b1
[Sysname-behavior-b1] remark customer-vlan-id 111
remark service-vlan-id
Syntax
remark service-vlan-id vlan-id
undo remark service-vlan-id
View
Traffic behavior view
Default Level
2: System level
Parameters
vlan-id: Service-provider VLAN (SVLAN) ID to be marked for packets, in the range of 1 to 4094.
To Next Page
Loading...
Need help?
General
