9-23
If only the bridge-aggregation keyword is specified, the command clears the statistics of all Layer
2 o aggregate interfaces.
If the bridge-aggregation interface-number keyword and argument combination is specified, this
command clears the statistics of the specified Layer 2 aggregate interface.
The bridge-aggregation keyword becomes available only after you create Layer 2 aggregate
interfaces on the device.
Examples
# Clear the statistics of Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1
reset lacp statistics
Syntax
reset lacp statistics [ interface interface-list ]
View
User view
Default Level
1: Monitor level
Parameters
interface-list: Link aggregation member port list, in the form of interface-type interface-number [ to
interface-type interface-number ], where interface-type interface-number indicates port type and port
number.
Description
Use the reset lacp statistics command to clear the LACP statistics on the specified member ports or
all member ports if no member ports are specified.
Related commands: display link-aggregation member-port.
Examples
# Clear the LACP statistics on all link aggregation member ports.
<Sysname> reset lacp statistics
shutdown
Syntax
shutdown
undo shutdown
View
Layer 2 aggregate interface view
Default Level
2: System level
Parameters
None
To Next Page
Loading...
Need help?
General
