H3C S7500E Series Command Reference

3-17
Parameters
vlan-id: Specifies the management VLAN ID, in the range 1 to 4094.
Description
Use the management-vlan command to configure the management VLAN of the ONU.
Use the undo management-vlan command to restore the default management VLAN ID of the ONU.
By default, VLAN 1 operates as the management VLAN of the ONU.
Examples
# Configure the management VLAN of the ONU as VLAN 10.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] management-vlan vlan 10
multicast-control host-aging-time
Syntax
multicast-control host-aging-time host-aging-time
undo multicast-control host-aging-time
View
ONU port view
Default Level
1: Monitor level
Parameters
host-aging-time: Aging time of multicast group member port in multicast control mode, in seconds. It is
in the range 200 to 1000 and defaults to 260.
Description
Use the multicast-control host-aging-time command to configure the aging time of multicast group
member port in multicast control mode.
Use the undo multicast-control host-aging-time command to restore the default aging time of
multicast group member port in multicast control mode.
By default, the aging time of a multicast group member port is 260 seconds.
Note that this command is available in multicast control mode only.
Examples
# Configure the aging time multicast group member port in multicast control mode as 500 seconds.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] multicast-control host-aging-time 500
multicast-mode
Syntax
multicast-mode { igmp-snooping | multicast-control }
undo multicast-mode
View
ONU port view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English