20-17
Field Description
Basic optional TLV
Basic TLVs, including:
Port description TLV
System name TLV
System description TLV
System capabilities TLV
Management address TLV
IEEE 802.1 extended TLV
IEEE 802.1 organizationally specific TLVs, including:
Port VLAN ID TLV
Port and protocol VLAN ID TLV
VLAN name TLV
IEEE 802.3 extended TLV
IEEE 802.3 organizationally specific TLVs, including:
MAC-Physic TLV
Power via MDI TLV
Link aggregation TLV
Maximum frame size TLV
LLDP-MED extend TLV
LLDP-MED TLVs, including:
Capabilities TLV
Network Policy TLV
Extended Power-via-MDI TLV
Location Identification TLV
Inventory TLV, which can be hardware revision TLV, firmware
revision TLV, software revision TLV, serial number TLV,
manufacturer name TLV, model name TLV, and asset id TLV.
lldp admin-status
Syntax
lldp admin-status { disable | rx | tx | txrx }
undo lldp admin-status
View
Layer 2 Ethernet interface view, port group view
Default level
2: System level
Parameters
disable: Specifies the Disable mode. A port in this mode does not send or receive LLDPDUs.
rx: Specifies the Rx mode. A port in this mode receives LLDPDUs only.
To Next Page
Loading...
Need help?
General
