H3C S7500E Series Command Reference

16-3
PORT VLAN MODE
-----------------------------------------------
GigabitEthernet2/0/1 2 AUTO
GigabitEthernet2/0/2 3 AUTO
Table 16-2 display voice vlan state command output description
Field Description
Voice VLAN system capacity Maximum number of voice VLANs supported by the system
Current Voice VLAN Count Number of existing voice VLANs
Voice VLAN security mode
Security mode of the voice VLAN: Security for security mode; Normal for
normal mode
Voice VLAN aging time Aging time of the voice VLAN
Current voice vlan enabled port
and its mode
Voice VLAN-enabled port and its voice VLAN assignment mode
PORT Voice VLAN-enabled port name
VLAN ID of the voice VLAN enabled on the port
MODE Voice VLAN assignment mode of the port: manual or automatic.
voice vlan aging
Syntax
voice vlan aging minutes
undo voice vlan aging
View
System view
Default Level
2: System level
Parameters
minutes: Voice VLAN aging time, in the range 5 to 43200 minutes.
Description
Use the voice vlan aging command to configure the voice VLAN aging time.
Use the undo voice vlan aging command to restore the default.
By default, the voice VLAN aging time is 1440 minutes.
When a port in automatic voice VLAN assignment mode receives a voice packet, the system decides
whether to assign the port to the voice VLAN based on the source MAC address of the voice packet.
Upon assigning the port to the voice VLAN, the system starts the aging timer. If no voice packets are
received on the port until the aging time expires, the system automatically removes the port from the
voice VLAN. This aging time only applies to the ports in automatic voice VLAN assignment mode.
Related commands: display voice vlan state.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English