H3C S7500E Series Command Reference

4-19
View
FTTH view
Default Level
3: Manage level
Parameters
seconds: Sampling interval (in seconds). It is in the range 1 to 3600 and defaults to 4.
Description
Use the timer sample command to set the sampling interval for the system.
Use the undo timer sample command to restore the default sampling interval for the system.
Examples
# Set the sampling interval of the EPON system to 10 seconds.
<Sysname> system-view
[Sysname] ftth
[Sysname-ftth] timer sample 10

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English