H3C S7500E Series Command Reference

1-11
Flow-control is not enabled
The Maximum Frame Length is 9216
Broadcast MAX-ratio: 100%
Unicast MAX-ratio: 100%
Multicast MAX-ratio: 100%
Allow jumbo frame to pass
PVID: 1
Mdi type: auto
Link delay is 0(sec)
Port link-type: access
Tagged VLAN ID : none
Untagged VLAN ID : 1
Port priority: 0
Peak value of input: 0 bytes/sec, at 2000-04-26 17:18:22
Peak value of output: 0 bytes/sec, at 2000-04-26 17:18:22
Last 300 seconds input: 0 packets/sec 0 bytes/sec -%
Last 300 seconds output: 0 packets/sec 0 bytes/sec -%
Input (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Input (normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Input: 0 input errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 frame, - overruns, 0 aborts
- ignored, - parity errors
Output (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output (normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
Table 1-5 display interface command output description
Field Description
current state Physical state of the Ethernet interface. For details, see Table 1-6.
IP Packet Frame Type Ethernet framing format on the port.
Hardware address Hardware address of the port.
Description Description of the port.
Loopback Loopback testing status on the port.
Unknown-speed mode The port will negotiate a speed with its peer.
unknown-duplex mode The port will negotiate a duplex mode with its peer.
The Maximum Frame Length The maximum Ethernet frame length allowed on the port.
Broadcast MAX-ratio
Broadcast suppression threshold as a percentage of the port
transmission capability. When the threshold is exceeded, the port
drops broadcast packets.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English