186 IconMaster Installation and Configuration Manual
Chapter 8: Configuring IconMaster
The GPO option offers sources 1 to 13 and the Serial offers device IDs 0 to 31.
When Serial is selected, the Device ID value becomes the same for all
functions.
Selecting Machine Control Settings
If you have selected GPO or Serial as automation type, the Machine Control
columns (Play, Stop, Cue, Mark, Blank, Rewind, and Fast Forward) are
enabled, and you may select values from the drop-down list boxes.
Disabling Machine Control Settings
Select the Disabled check box to temporarily disable any Machine Control
settings you have made. (This is the default setting for the Automation Type.)
Preroll Functions
Using the Preroll functions, you can perform the following actions:
• Enable the preroll status
• Set or reset the preroll duration
Enabling Preroll Status
The Enabled check box enables the preroll status for that output. If you select
Enabled, but have Disabled selected under Type, no action will occur.
Setting/Resetting Preroll Duration
The Preroll Duration (Frames) sets the duration of the preroll from 0 to 600
frames. The default value is 60.
To make all of the preroll times match the preroll time of the selected item,
press Set All Durations Equal to Current Record’s Duration.
To Next Page
Loading...