EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PIM LAN delay (configured): 500 ms
PIM Hello override interval (negotiated): 2500 ms
PIM Hello override interval (configured): 2500 ms
PIM Silent: disabled
PIM neighbor tracking (negotiated): disabled
PIM neighbor tracking (configured): disabled
PIM generation ID: 0XF5712241
PIM Hello hold interval: 105 s
PIM Hello assert interval: 180 s
PIM triggered Hello delay: 5 s
PIM J/P interval: 60 s
PIM J/P hold interval: 210 s
PIM BSR domain border: disabled
PIM BFD: enable
PIM BFD min-tx-interval: 100 ms
PIM BFD min-rx-interval: 100 ms
PIM BFD detect-multiplier: 3
PIM dr-switch-delay timer : 20 s
Number of routers on network not using DR priority: 0
Number of routers on network not using LAN delay: 0
Number of routers on link not using neighbor tracking: 2
# Run the display pim bfd session command to display information about the BFD session on
each S9300. You can check whether the BFD session is set up on each S9300.
<S9300-B> display pim bfd session
VPN-Instance: public net
Total 1 BFD session Created
Vlanif100 (10.1.1.1): Total 1 BFD session Created
Neighbor ActTx(ms) ActRx(ms) ActMulti Local/Remote State
10.1.1.2 100 100 3 8192/8192 Up
# Run the display pim routing-table command to view the PLM routing table. S9300-C
functions as the DR. The (S, G) and (*, G) entries exist. The displayed information is as follows:
<S9300-C> display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
RP: 10.1.5.2
Protocol: pim-sm, Flag: WC
UpTime: 00:13:46
Upstream interface: vlanif200,
Upstream neighbor: 10.1.2.2
RPF neighbor: 10.1.2.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlanif100,
Protocol: igmp, UpTime: 00:13:46, Expires:-
(10.1.7.1, 225.1.1.1)
RP: 10.1.5.2
Protocol: pim-sm, Flag: SPT ACT
UpTime: 00:00:42
Upstream interface: vlanif200
Upstream neighbor: 10.1.2.2
RPF neighbor: 10.1.2.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlanif100
Protocol: pim-sm, UpTime: 00:00:42, Expires:-
----End
4 PIM-SM Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
4-70 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2009-07-28)

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals