Huawei Quidway S9300

Configuration Files
l S9300-A needs to be configured with only basic PIM SM functions. The configuration file
is not provided here.
l The following is the configuration file of S9300-B. The configuration file of S9300-C is
similar to the configuration file of S9300-B, and is not provided here.
#
sysname S9300-B
#
vlan batch 100 200
#
multicast routing-enable
#
bfd
#
interface vlanif 100
ip address 10.1.1.1 255.255.255.0
pim sm
igmp enable
pim bfd enable
pim bfd min-tx-interval 100 min-rx-interval 100 detect-multiplier 3
pim timer dr-switch-delay 20
#
interface vlanif 200
ip address 10.1.2.1 255.255.255.0
pim sm
#
interface GigabitEthernet1/0/0
port hybrid tagged vlan 200
#
interface GigabitEthernet2/0/0
port hybrid tagged vlan 100
#
ospf 1
area 0.0.0.0
network 10.1.1.0 0.0.0.255
network 10.1.2.0 0.0.0.255
#
return
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast 4 PIM-SM Configuration
Issue 01 (2009-07-28) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-71