EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
<S9300-B> display msdp peer-status
MSDP Peer Information of VPN-Instance: public net
MSDP Peer 192.168.2.2, AS 200
Description:
Information about connection status:
State: Up
Up/down time: 00:15:47
Resets: 0
Connection interface: vlanif200 (192.168.2.1)
Number of sent/received messages: 16/16
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 00:17:51
Information about (Source, Group)-based SA filtering policy:
Import policy: none
Export policy: none
Information about SA-Requests:
Policy to accept SA-Request messages: none
Sending SA-Requests status: disable
Minimum TTL to forward SA with encapsulated data: 0
SAs learned from this peer: 0, SA-cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Count of RPF check failure: 0
Incoming/outgoing SA messages: 0/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
# Run the display pim routing-table command to view the PIM routing table on an S9300.
When multicast sources S1 (10.110.1.2/24) in PIM-SM1 and S3 (10.110.3.2/24) in PIM-SM3
send multicast data to multicast group G (225.1.1.1/24), Receiver (10.110.2.2/24) in PIM-SM2
can receive the multicast data. The PIM routing tables displayed on S9300-B and S9300-C are
as follows:
<S9300-B> display pim routing-table
VPN-Instance: public net
Total 0 (*, G) entry; 1 (S, G) entry
(10.110.1.2, 225.1.1.1)
RP: 1.1.1.1(local)
Protocol: pim-sm, Flag: SPT EXT ACT
UpTime: 00:00:42
Upstream interface: vlanif200
Upstream neighbor: 192.168.1.1
RPF neighbor: 192.168.1.1
Downstream interface(s) information:
Total number of downstreams: 1
1: vlanif100
Protocol: pim-sm, UpTime: 00:00:42, Expires:-
<S9300-C> display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 2 (S, G) entries
(*, 225.1.1.1)
RP: 2.2.2.2(local)
Protocol: pim-sm, Flag: WC RPT
UpTime: 00:13:46
Upstream interface: NULL,
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: vlanif300,
Protocol: pim-sm, UpTime: 00:13:46, Expires:-
(10.110.1.2, 225.1.1.1)
RP: 2.2.2.2
Protocol: pim-sm, Flag: SPT MSDP ACT
5 MSDP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
5-30 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2009-07-28)

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals