Huawei Quidway S9300

UpTime: 00:00:42
Upstream interface: vlanif200
Upstream neighbor: 192.168.2.1
RPF neighbor: 192.168.2.1
Downstream interface(s) information:
Total number of downstreams: 1
1: vlanif300
Protocol: pim-sm, UpTime: 00:00:42, Expires:-
(10.110.3.2, 225.1.1.1)
RP: 2.2.2.2
Protocol: pim-sm, Flag: SPT MSDP ACT
UpTime: 00:00:42
Upstream interface: vlanif400
Upstream neighbor: 192.168.4.2
RPF neighbor: 192.168.4.2
Downstream interface(s) information:
Total number of downstreams: 1
1: vlanif300
Protocol: pim-sm, UpTime: 00:00:42, Expires:-
----End
Configuration Files
l Configuration file of S9300-A
#
sysname S9300-A
#
vlan batch 100 101
#
multicast routing-enable
#
interface vlanif 100
ip address 192.168.1.1 255.255.255.0
pim sm
#
interface vlanif 200
ip address 10.110.1.1 255.255.255.0
pim sm
#
interface GigabitEthernet1/0/0
port hybrid untagged vlan 101
#
interface GigabitEthernet2/0/0
port hybrid tagged vlan 100
#
ospf 1
area 0.0.0.0
network 192.168.1.0 0.0.0.255
network 10.110.1.0 0.0.0.255
#
return
l Configuration file of S9300-B
#
sysname S9300-B
#
vlan batch 100 200
#
multicast routing-enable
#
interface vlanif 100
ip address 192.168.1.2 255.255.255.0
pim sm
#
interface vlanif 200
ip address 192.168.2.1 255.255.255.0
pim sm
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast 5 MSDP Configuration
Issue 01 (2009-07-28) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-31