Huawei Quidway S9300

Expires: 00:00:18
Last reporter: 133.133.4.1
Last-member-query-counter: 0
Last-member-query-timer-expiry: off
Group mode: exclude
Version1-host-present-timer-expiry: off
Version2-host-present-timer-expiry: 00:00:17
# Run the display pim routing-table command to view the PIM-SM multicast routing table on
an S9300. Take the information displayed on S9300-D for example:
<S9300-D> display pim routing-table
VPN-Instance: public net
Total 0 (*, G) entry; 2 (S, G) entries
(133.133.1.1, 232.1.1.1)
RP: 192.168.3.2
Protocol: pim-sm, Flag:
UpTime: 00:11:25
Upstream interface: Vlanif30
Upstream neighbor: 192.168.4.2
RPF prime neighbor: 192.168.4.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlanif13
Protocol: igmp, UpTime: 00:11:25, Expires:-
(133.133.3.1, 232.1.1.1)
RP: 192.168.3.2
Protocol: pim-sm, Flag:
UpTime: 00:11:25
Upstream interface: Vlanif21
Upstream neighbor: 192.168.3.1
RPF prime neighbor: 192.168.3.1
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlanif13
Protocol: igmp, UpTime: 00:11:25, Expires:-
----End
Configuration Files
l Configuration file of S9300-A
#
sysname S9300-A
#
vlan batch 10 20 30
#
multicast routing-enable
#
acl number 2000
rule 5 permit source 232.1.1.0 0.0.0.255
#
interface vlanif 10
ip address 133.133.1.2 255.255.255.0
pim sm
#
interface vlanif 20
ip address 192.168.1.1 255.255.255.0
pim sm
#
interface vlanif 30
ip address 192.168.4.2 255.255.255.0
pim sm
#
interface GigabitEthernet1/0/0
port hybrid untagged vlan 10
#
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast 2 IGMP Configuration
Issue 01 (2009-07-28) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2-27