iZ Technology RADAR - Delete an Image File; Macros (Session Controller Only)

iZ Technology Corporation
RADAR 3.50
OPERATIONS
105
DELETE AN IMAGE FILE
DEL IMG FILE allows the user to permanently delete old and/or unwanted ISO image files from the
internal system drive that had been created for the purpose of burning a DVD-R and/or CD-R.
To delete an image file:
Use the , the and keys and the key to go to the MAIN MENU / FILE
MENU / DEL IMG FILE dialogue and press the key.
At the DELETE DVD IMAGE prompt, use the and keys to select the .IMG file to remove
from the internal system drive and press the key.
The deletion cannot be undone. There is no way to recover file(s) and/or folder(s) once
they have been erased.
MACROS (SESSION CONTROLLER ONLY)
RADAR macro keys allow users single keys to perform multi-step functions.
To record and use a macro:
Hold and press a key.
Perform a key sequence on the Session Controller, the macro key will flash indicating the macro
is being recorded.
Press the key to end recording of the sequence.
Press the key to trigger RADAR to perform saved key sequence.
LOAD
The LOAD feature allows the user to import macros from a file on a floppy disk, the internal hard drive or
a connected SCSI drive.
To load a macro:
Use the , the and keys and the key to go to the MAIN MENU / FILE
MENU / MACROS menu item and press the key.
Use the and keys to select LOAD from the MACRO KEYS: dialogue and press the
key.
Use the and keys to select FLOPPY, HARD or SCSI in the LOAD FROM: dialogue and
press the key.
Use the and keys to select the macro file to load in the LOAD MACROS: dialogue and
press the key.
When the load is complete the display will read MACROS LOADED PRESS ANY BUTTON.