iZ Technology Corporation
DIAGNOSTICS MENU
This function scans the SCSI bus and gives a report
detailing the attached devices and their SCSI ID’s.
This function selects and initializes attached SCSI hard
disks. See OPERATIONS: DISK MANAGEMENT: INITIALIZE
DISK for more information.
This function selects and checks attached SCSI hard
disks. See OPERATIONS: DISK DIAGNOSTICS: CHECK
DISK for more information.
This function selects and repairs attached SCSI hard
disks. See OPERATIONS: DISK DIAGNOSTICS: REPAIR
DISK for more information.
This function selects and checks projects for errors. See
OPERATIONS: DISK DIAGNOSTICS: CHECK PROJECT for
more information.
This option allows the user to specify the project that will
be loaded the next time a RADAR
drive is mounted. See
OPERATIONS: PROJECT MANAGEMENT: SET STARTUP
PROJECT for more information.
This function displays and clears any real time errors that
are experienced by the system during playback or record.
See OPERATIONS: DISK DIAGNOSTICS: REALTIME ERRORS
for more information.
This function selects and verifies attached SCSI hard
disks. See OPERATIONS: DISK DIAGNOSTICS: VERIFY
HARD DISKS for more information.
This function provides an accurate digital read-out of the
dBFS audio level on any selected tracks.
MAIN/DIAG MENU:
SET STARTUP PROJ
MAIN/DIAG MENU:
SHOW AUDIO LEVEL
MAIN/DIAG MENU:
VERIFY DISKS
MAIN/DIAG MENU:
REALTIME ERRORS
MAIN/DIAG MENU:
CHECK PROJECT
MAIN/DIAG MENU:
REPAIR DISK
MAIN/DIAG MENU:
CHECK DISK
MAIN/DIAG MENU:
INIT DISK
MAIN/DIAG MENU:
SCAN SCSI BUS
To Next Page
Loading...
