iZ Technology Corporation
RESET ROUTING
To reset the I/O configuration back to the default 1:1:
Use the , the and keys and the key to go to the MAIN MENU / I/O
MENU / IO ROUTING / RESET ROUTING and press the key.
Use the and keys to select IN, OUT or BOTH and then press the key.
TRACK MANAGEMENT
___________________________________
Each RADAR project contains 24 discrete tracks for recording audio. Each track has its own user-defined
input and output with the default set to 1:1. There is no need to assign voices or assign recording
directories. In fact none of the track management chores required by digital audio workstations apply at
all. RADAR takes care of all the details so work can be done quickly and easily.
NAMING TRACKS
Track names are displayed in RADARView along the left-hand side beside each track number.
To name a track:
Press the key or use the , the and keys and the key to go to
the MAIN MENU / PROJ MENU / NAME TRACK selection and press the key.
Use the Track Arm keys or the and keys to select a track.
Use the key to move to the name field and type in a name using the keyboard and press the
key.
TRACK NOTES
With the key track-specific notes about each track can be saved along with other project info
(e.g., the locate list) as a printable text file.
To edit TRACK NOTES:
Use the , the and keys and the key to go to the MAIN MENU / PROJECT
MENU / PROJECT NOTES dialogue and press the key or press the key on the
Session Controller.
Press a Track Arm key through while in edit mode. At the NOTES FOR TRK:XX prompt,
enter details about that specific track. Press
to return to the general notes, or to
exit PROJECT NOTES.
To Next Page
Loading...