iZ Technology RADAR - Screen Shot Image Saved on; The Archive Drive; Radarview

iZ Technology Corporation
RADAR 3.50
OPERATIONS
45
SCREEN SHOT IMAGE SAVED ON THE ARCHIVE DRIVE
To save a screen shot:
Press + , a screen shot will be saved to a file named SCREENSHOT.BMP. This file will be located
in the D:ARCHIVE/SYSTEM FILES/SCREEN SHOT folder.
This function will overwrite the previous screen shot each time it is used.
RADARVIEW
With an SVGA monitor attached, RADAR gives users a substantial display of the following information
(clockwise from top):
• 24 channels of metering with status and clip LED’s.
• Large, easy to read positional display.
• RADAR Model and Software Version
• Sync Status Display:
– Sample rate and bit depth.
– Current timecode rate and incoming TC rate.
– Sync status and reference sync source.
– Chase status and TC format.
– Sync offset.
• Transport Status Display:
– Vari-speed indicator and percentage display.
– Cycle, Auto Input, Auto Punch and Auto Play indicators.
– Pre-Roll status and current value.
– Post-Roll current value.
• Edit Status Display:
– Crossfade value.
– Last Edit display.
– Undo/Redo Level setting.
• RADARLink/ Locator Display:
– RADARLink ID and status.
– Start, Mark In, Mark Sync, Mark Out, Range values.
– Display (counter) format.
• Project Name
• Locate List