www.izcorp.com • 1.800.776.1356
TRANSPORT OPERATIONS
________________________________
RADAR transport operation is based on a professional tape recorder. Transport RADAR applies the best
features of the tape machine auto-locator and combined them with the incredible power of non-linear
digital recording.
TRANSPORT KEYS
RADAR uses industry standard transport keys for both the Session Controller and the KC-24 keyboard:
REWIND
Simulates the transport rewind function of a tape machine. Double keying the
(Rewind) key enters a fast rewind mode that is 3 times the current rewind
speed. The default speed for rewind is 8 times normal playback speed. Fast-
forward and rewind speeds can be changed with the preferences listed below.
FAST FORWARD
Simulates the fast forward transport function of a tape machine. Double keying
the (Fast Forward) key enters a fast forward mode that is 3 times the
current fast forward speed. Default fast forward speed is 8 times playback
speed. Fast forward and rewind speeds can be changed with the preferences
listed below.
To change fast wind speeds:
Use the , the and keys and the key to go to the MAIN MENU /
PREFERENCES MENU / FFWD & REW RATE menu selection and press the key.
Use the and keys to select a value and press the key.
PLAY
Begins audio playback from current location. Pressing (Play) while recording cancels record without
stopping playback. Pressing (Play) and (Rewind) together enters reverse play mode.
STOP
Cancels all transport operations including record and puts RADAR into ready mode.
REC
Drops all record enabled tracks into record mode. The default mode requires both the (Play) and
keys to be pressed simultaneously to enter record mode. If the 1-BUTTON RECORD mode is enabled,
pressing the key is all that is required.
To Next Page
Loading...
