iZ Technology Corporation
To copy automation settings to a floppy:
Use the , the and keys and the key to go to the MAIN MENU / FILE
MENU / MIX AUTOMATION / DMXR100 menu item and press the key.
Insert a floppy disk and use the key to select FLOPPY.
When the save is complete the display will read AUTOMATION FILE COPIED TO FLOPPY.
FILE PREFS
SHOW SIZE
This preference allows the user to choose the information displayed prior to a backup or export
procedure.
To modify the information displayed prior to a backup or export:
Use the , the and keys and the key to go to the MAIN MENU / FILE
MENU / FILE PREFS / SHOW SIZE and press the key.
Use the and keys to select OFF, MBYTES or TIME in the SHOW SIZE: dialogue and
press the key.
EXPORT FORMAT
This preference allows the user to choose the default setting for the file format that will be used for
exporting from the RADAR.
To select the default file format setting for export:
Use the , the and keys and the key to go to the MAIN MENU / FILE
MENU / FILE PREFS / EXPORT FORMAT and press the key.
Use the and keys to select WAV, BWAV or ASK in the FILE FORMAT: dialogue and
press the key. If selecting the ASK option then RADAR will prompt the user to choose the
file format each export.
FILL SILENCE
This preference allows the user to choose the default setting for FILL SILENCE, which determines
whether or not non-audio regions are filled with silence to create contiguous files for export or backup.
To select the default setting for FILL SILENCE:
Use the , the and keys and the key to go to MAIN MENU / FILE MENU
/ FILE PREFS / FILL SILENCE and press the key.
Use the and keys to select NO, GAPS, ALL or ASK in the FILL SILENCE: dialogue and
press the key. If selecting the ASK option then RADAR will prompt the user to choose the
FILL SILENCE option each export or BWAV backup.
To Next Page
Loading...
