www.izcorp.com • 1.800.776.1356
REFORMAT QUALITY
This preference allows the user to choose the default setting for REFORMAT QUALITY, which
determines the speed and quality of any sample rate/bit resolution conversion required during import or
export.
To select the default setting for REFORMAT QUALITY:
Use the , the and keys and the key to go to MAIN MENU / FILE MENU
/ FILE PREFS / REFORMAT QUALITY and press the key.
Use the and keys to select Q1, Q2 or Q3 in the REFORMAT QUALITY: dialogue and
press the key. Q3 is the slowest but highest quality conversion and is the factory default
setting.
FILE NAME FORMAT TEMPLATES
The BWAV files in the AUDIO FILES sub-folder of a BWAV backup or export are named according to
the FILE NAME FORMAT specified in the FILE PREFS. There are two options for file name format:
PRESET and CUSTOM.
If PRESET is selected, choose from the following pre-defined naming conventions:
TRK-NAME-STAMP
E.g. T01-TrkName-01h22m36s12f00.WAV
This format consists of the track number, up to 12 characters of the track
name, and the time stamp. This is the default format.
TRK-PROJ-STAMP E.g. T01-ProjName-01h22m36s12f00.WAV
This format consists of the track number, up to 12 characters of the project
name, and the time stamp.
TRK-REGION-NAME
E.g. T01-0001-TrackName.WAV
This format consists of the track number, region number, and track name.
TRK-REGION-PROJ
E.g. T01-0001-ProjectName.WAV
This format consists of the track number, region number, and project name.
PROJ-TRK-REGION
E.g. ProjectName-T01-0001.WAV
This format consists of project name, track number and region.
TRK-REGION (DOS)
E.g. T01-0001.WAV
This simple format containing the track and region number conforms to the
DOS 8.3 file naming convention.
To Next Page
Loading...
