www.izcorp.com • 1.800.776.1356
To SET STARTUP PROJ:
Navigate to MAIN MENU / DIAGNOSTICS MENU / SET STARTUP PROJ and press the
key.
At the AFTER MOUNTING, LOAD PROJECT: prompt, type in a project number and press the
key. If there isn’t a project already at the project number selected, RADAR will
automatically create one.
Navigate to MAIN MENU / DISK MENU / MOUNT/UNMOUNT and press the key.
Use the and keys to select MOUNT at the FILESYSTEM: prompt. RADAR will now
MOUNT the selected startup project.
VIRTUAL TRACKS
Audio data can be freely copied and pasted between projects without using more disk space. This opens
up many creative possibilities; for example, the powerful implementation of virtual or comp tracks.
To create project based virtual tracks:
Create a stereo or mono sub-mix of the tracks in a project.
Copy and paste the sub-mixed tracks into a brand new project.
Record multiple takes of an instrument or vocal, using the sub-mix as a reference.
Edit together a comp (composite track) of all the best overdub performances.
Copy the composite track or tracks back into the original project.
Older versions of RADAR
software are not able to access projects beyond 99. If needing
to downgrade software, or use an audio drive on RADARII and RADAR24 units running
3.26 or older software, all projects should first be renumbered to a number less than 100.
Higher number projects may be lost when using pre-3.30 software.
PROJECT NOTES
With the key, general notes about the project and specific notes about each track can be
entered and saved along with other project info (e.g., the locate list) as a printable text file.
To edit PROJECT NOTES:
Use the , the and keys and the key to go to the MAIN MENU / PROJECT
MENU / PROJECT NOTES dialogue and press the key or press the
key on the
Session Controller.
At the PROJECT NOTES: prompt select EDIT and press the key.
At the NOTES LINE:XX prompt, select a line to write to using the and keys.
To Next Page
Loading...
