iZ Technology Corporation
BURN A DATA CD-R/DVD-R
This feature allows the user to burn backups and/or exports that have been stored on the internal system
drive (e.g., D:ARCHIVE) to A DVD-R or CD-R. A multi-drive must be installed in the RADAR in order to
make use of this feature.
Make sure that all projects/files to be burned are placed into the same folder on
D:ARCHIVE.
These steps are not necessary unless burning files on the D:ARCHIVE. If burning current
projects refer to the previous section OPERATIONS: FILE MANAGEMENT.
To backup and/or export projects/files to D:ARCHIVE refer to the OPERATIONS: FILE
MANAGEMENT sections of the manual for the specific steps.
To burn backups and/or exports to DVD-R or CD-R:
Create the ISO image file for burning.
a. Use the , the and keys and the key to go to the MAIN MENU /
FILE MENU / MAKE DVDCD IMAGE and press the key.
b. Use the and keys and the and keys to navigate to the folder that contains
the backup and/or export file(s) and press the key.
c. At the XX MB CONTINUE? NO YES prompt, confirm that the image MB size will fit the
destination DVD-R or CD-R select YES and press the key. If the image file is too
large, use the FILE MANAGEMENT BROWSE: feature along with CUT, COPY, MOVE
and/or PASTE in order to create a folder that contains the appropriate projects/files that fits
the destination DVD-R or CD-R.
Standard sizes are: DVD-R 4.3 GB
CD-R 700 MB
d. At the NAME IMAGE FILE prompt, create an image name or use the default UNTITLED
and press the key.
To Next Page
Loading...
