www.izcorp.com • 1.800.776.1356
PROJECT TEMPLATES
Using a template can simplify the process of creating new projects. Templates can take the settings and
audio established in the current project and apply them to subsequent projects. Settings than can be
applied to other projects via template include :
• track names • bit depth
• sample rate • locate points
• time-code rate • start time
Use the following options to create and manage templates.
To create a new template based on the current loaded project:
Go to the MAIN MENU / PROJECT MENU / TEMPLATE MENU/ MAKE TEMPLATE selection
and press the key.
At the NAME TEMPLATE prompt use the QWERTY keyboard to enter the template name and
press the key.
At the INCLUDE AUDIO IN TEMPLATE prompt, choose YES to include the audio and press the
key.
At the INCLUDE UNDO IN TEMPLATE prompt, choose YES to include the audio and press the
key.
To set a default template to be used for all new projects:
Go to the MAIN MENU / PROJECT MENU / PROJECT PREFS / NEW PROJ SETTNGS
selection and press the key.
At the NEW PROJ SETTNGS prompt, choose TEMPLATE and press the key.
Use the and keys and choose from CURRENT, DEFAULT or a previously created
template and press the key.
To set RADAR to ASK which template to use each time a project is created:
Go to the MAIN MENU / PROJECT MENU / PROJECT PREFS / NEW PROJ SETTNGS
selection and press the key.
At the NEW PROJ SETTNGS prompt, choose ASK and press the key.
Create a new project and the prompt SELECT TEMPLATE will display. Use the and keys
and choose from CURRENT, DEFAULT or a previously created template and press the
key.
To Next Page
Loading...
