www.izcorp.com • 1.800.776.1356
To modify the record crossfade:
Use the , the and keys and the key to go to the MAIN MENU / EDIT
MENU / REC XFADE TIME menu item and press the key.
Use the and keys to select the IN crossfade time. Use the and keys, the numeric
keys or the Jog/Shuttle Wheel to set the IN crossfade time.
Use the and keys to select the OUT crossfade time. Use the and keys, the
numeric keys or the Jog/Shuttle Wheel to enter the desired value and press the key.
To modify the edit crossfade:
Use the , the and keys and the key to go to the MAIN MENU / EDIT
MENU / EDIT XFADE TIME menu item and press the key.
Use the and keys, the numeric keys or the Jog/Shuttle Wheel to set the edit crossfade
time and press the key.
To modify the crossfade type:
Use the , the and keys and the key to go to the MAIN MENU / EDIT
MENU / CROSS FADE TYPE menu item and press the key.
Use the and keys to select the crossfade type and press the key.
Only MOVE, ERASE and SLIDE are affected by the CROSSFADE TYPE setting.
MARKING A TIME REGION
Time regions are selected for editing using the and keys on the Session Controller or
the KC-24 keyboard. A SYNC marker may also specify a particular event that is defined in the audio. This
SYNC marker can be used as the anchor to paste a track-region. This is very useful for pasting sound
effects to spotted video locations.
Example: A door creaks as it slams and is followed by reverberation.
To Next Page
Loading...
