iZ Technology RADAR - Preferences; Software

www.izcorp.com • 1.800.776.1356
CONFIGURATION
RADAR 3.
5
0
40
PREFERENCES
__________________________________________
Every time a new project is created, this prompts RADAR to determine a variety of project settings such
as sample rate, bit depth, TC format etc. In order to save time and effort, RADAR assigns these values
automatically using the current values selected in the PREFERENCES MENU.
To set the preferences for newly created projects:
Use the key, the and keys and the key to go to the MAIN MENU /
PREFERENCES MENU / PROJ PREFS and press the key.
Review and modify the settings in the sub-menus to desired specifications.
SOFTWARE
_____________________________________________
Although RADAR is shipped with the latest version of RADAR software, it can be kept up to date by
downloading new versions of the software as they become available. iZ is constantly working to add new
features and to improve the performance and reliability of RADAR. Software updates and downloading
instructions are available from the iZ website at www.izcorp.com. or can be obtained from an iZ
authorized dealer, or iZ Technology.
INSTALL PROCEDURE
Make a backup copy of everything that is on the current recording drive. Upgrading software
shouldn’t affect the audio on the recording drive, however; everything should be backed up as a
precautionary measure.
Insert the RADAR install CD into the RADAR CD-R/DVD-R Multi-drive or copy the
RADAR_v3.XX.X.zip file to any media attached to RADAR (i.e., N:NETWORK, D:ARCHIVE,
CD-R, REV DISK or USB DRIVE).
Use the key, the and keys and the key to go to the MAIN MENU /
SYSTEM MENU / UPDATE SOFTWARE and press the key.
At the UPDATE S/W FROM: prompt select either WEB:IZCORP.COM (WAN Access Required),
N:NETWORK, D:ARCHIVE, B:CD, 4: REV or E:USB DRIVE and press the key.
At the INSTALL VER 3.XX?: prompt use the and keys to select YES and press the
key.
At the REBOOT RADAR TO INSTALL SOFTWARE prompt, power off RADAR and power back
on.