iZ Technology Corporation
FOOT SWITCHES
Foot switches can be used in conjunction with the Session Controller for hands free play/stop, last
locate, punch in/out operation and macro assignment. The foot switches should be of the normally open,
momentary type.
Up to three foot switches can be plugged in to the back of the Session Controller. Their default functions
are PLAY/STOP, LAST LOC, and PUNCH IN/OUT. Use the ASSIGN FT-SWITCH setting in the
PREFERENCES MENU, to assign macros to any of the foot switches.
To assign a macro to a footswitch port:
Go to MAIN MENU / PREFERENCES MENU / ASSIGN FT-SWITCH and press the key.
At the ASSIGN FT-SWITCH prompt use the and keys to select from 1: PLAY/STOP, 2:
LAST LOC, 3: PUNCH IN/OUT.
Once the footswitch to be changed is selected use the to move the cursor to the function and
use the and keys to select the function or MACRO 1-8. Once the function or macro
function has been assigned press the key to confirm the selection.
RECORDING
____________________________________________
With RADAR, recording is as easy as using a professional tape recorder. Arm the desired track(s) by
pressing the corresponding track arm key(s) and press (Play) and . Use the following
preferences with RADAR to increase efficiency in your workflow.
RECORD PREFS
Because RADAR is used in many different professional applications, several recording options to
customize RADAR operation for specific needs have been added.
ONE-BUTTON RECORD
With this feature disabled, press and hold (Play) and then press on the Session Controller or
the KC-24 in order to begin recording. If this feature is enabled, just press to start recording.
To change the operation of the transport controls for recording:
Use the , the and keys and the key to go to the MAIN MENU /
PREFERENCES MENU / RECORD PREFS menu selection and press the key.
Use the and keys to select 1-BUTTON RECORD and press the key.
Use the and keys to select either DISABLED or ENABLED and press the key.
TRACK ARM ACTION
The track arming keys on the Session Controller or the KC-24 can engage either record READY or
instant RECORD status per track. Instant RECORD allows the ability to drop in and out of record by
pressing the Track Arm keys during playback.
To Next Page
Loading...
