iZ Technology Corporation
Copy this project folder over to a DAW recording drive or USB/Firewire drive for DAW
manipulation.
After file copy is complete, safely unmount the drive from the workstation.
Do not write or delete any files on the RADAR recording drive when mounted on the Mac
or PC. This drive is read only, and any modification will possibly destroy any data on the
RADAR drive.
DON’T WRITE TO RADAR BWAV DRIVES USING NON-RADAR SOFTWARE
Mount/unmount RADAR BWAV audio drives in systems running MacOS, Unix, Windows,
Linux, etc, then browse directories and copy files or folders from the RADAR BWAV drive
to the other system. Subsequently the RADAR BWAV drive can be used in RADAR
without risk of RADAR recorded data loss or corruption. However, if any of the following is
done to RADAR BWAV disks in another system, there is a risk of loss or corruption of
RADAR recorded data:
1. Mount/Unmount RADAR BWAV disks that had been clones in a RADAR recorded
dual disk session and subsequently attempt to mount them as a cloned pair in
RADAR. These disks, having been mounted in another system, are no longer clones.
Attempted subsequent Dual Disk use in RADAR of such disks may cause data loss or
corruption.
2. Write files into any directory on a RADAR BWAV drive while mounted on another
system.
3. Delete, rename, or modify any existing files or folders on a RADAR BWAV disk or
modify the disk in any way using another system. These operations may only be done
in RADAR.
LIVE RECORDING
_______________________________________
DUAL DISK MODE
With a 3-bay RADAR system and Adrenaline
®
Plus record drives can be initialized for mirrored (dual disk)
recording. In DUAL DISK MODE, audio is recorded simultaneously to both disks.
To enable DUAL DISK MODE:
Use the , the and keys and the key to go to the MAIN MENU / DISK
MENU / DISK MODE / DUAL DISK dialogue and press the key.
At the MASTER DISK: 0 prompt use the and
keys to select the disk ID of the master.
To Next Page
Loading...
