www.izcorp.com • 1.800.776.1356
To change the number of undo levels:
Use the , the and keys and the key to go to the MAIN MENU / PROJECT
MENU / UNDO LEVEL / UNDO LEVEL: dialogue and select the desired undo level.
Enter a preferred number of undo levels and press the key.
Using UNDO(REDO):
Press the
(REDO) key to undo the last record or editing operation.
Press +
(REDO) to redo the last record or editing operation.
Not all operations are undoable. Only recording and editing operations can be undone and
redone with the
(REDO) key.
FOOT SWITCH (OPTIONAL)
A foot switch can be used in conjunction with the Session Controller for hands-free punch in and punch
out. The foot switch should be a normally open momentary switch. See OPERATIONS: TRANSPORT
OPERATIONS: FOOT SWITCHES for more information.
VARI-SPEED
___________________________________________
VARI-SPEED is used to change the pitch of recording and playback by altering the sample clock. There
are many uses for this feature including:
• Lowering the pitch of bed tracks during an overdub session so that a vocalist can sing in a more
comfortable range.
• Thickening sounds by recording multiple tracks in altered pitches.
• Matching the tuning of recorded tracks with difficult to tune instruments such as a piano.
The RADAR VARI-SPEED control can be adjusted by a percentage of deviation from normal speed or by
cents, which are equal to one hundredth of a semitone. The range is variable from minus 50% or 1200
cents to a maximum of plus 200% or 1902 cents at a sample rate of 48 kHz. The VARI-SPEED feature
can be used in all transport modes including record.
To Next Page
Loading...
