iZ Technology Corporation
ARROW KEYS
The , , , and are used for navigating the menu system. They also have special functions
depending on the current state of the RADAR.
WITHIN A MENU
• Select menus and subsequent sub-menus.
• Move between fields or selections in menu dialogs.
WITHIN A NAME FIELD
• Use and/or for entering the following symbols:
/ . - , + * ) ( ’ & % $ # ? ! BLANK { | } ? ? > = < ; :
as well as for scrolling through the numbers/letters.
• Use and/or for moving the cursor to the next/previous adjacent character field.
IN CONJUNCTION WITH A DIRECT KEY
• Certain direct key and menu dialogs use the and keys for incrementing and
decrementing values.
AS AN EXTENSION OF THE TRANSPORT
• Locates directly to the MARK IN point.
• Locates directly to the MARK OUT point.
• Auditions the audio between the selected MARK IN and
MARK OUT points.
AS AN EXTENSION OF THE TRANSPORT WITH PRE ROLL ENGAGED
• Locates directly to the MARK IN point with pre roll.
• Locates directly to the MARK OUT point with pre roll.
• Auditions the audio between the selected MARK IN and MARK OUT points
without pre roll.
JOG/SHUTTLE WHEEL (SESSION CONTROLLER ONLY)
The Jog/Shuttle Wheel allows users to manually jog and shuttle audio. The Jog/Shuttle Wheel can also
be used as an alternative to the numeric and arrow keys for navigation and data entry - this includes
menu and sub-menu selection, selection of options and value entry.
To Next Page
Loading...
