iZ Technology RADAR - Sync Menu

www.izcorp.com • 1.800.776.1356
REFERENCE
R
ADAR 3.50
170
Ability to record all 24 tracks at sample rates up to and
including 192 KHz. Seamless punching (real-time
crossfades) can be done 12 tracks at a time at 192 KHz,
or on all 24 tracks at 96KHz. See OPERATIONS: DISK
MANAGEMENT: RECORD 24 TRACKS AT 192 KHZ
(ADRENALINE PLUS CARD ONLY) for more information.
Allows users to have 24 tracks of seamless recording
during punch ins/outs when using a 64k cluster initialized
drive.
Provides an easy way to copy data from one hard drive to
another for backup or dual disk mode.
Save or view track information, project name/number,
sample rate, bit depth, sync rate, locate points.
When using external SATA this is used to enable or
disable the designated disk ID. See OPERATIONS: DISK
MANAGEMENT: ENABLE DISK ID more information.
SYNC MENU
The TC Settings menu provides synchronization options
that allow RADAR to easily integrate into any studio, post
or broadcast environment.
Shortcut keys (sets format and rate):
Session Controller + (TC PREF)
KC-24 +
The TC FORMAT dialogue allows the selection of either
SMPTE or MTC as a timecode format. SMPTE is input
and output via the LTC connectors on the back panel.
MTC is input and output using the MIDI IN and OUT
connectors on the rear panel.
TC SETTINGS:
TC FORMAT
MAIN/SYNC MENU:
TC SETTINGS
MAIN/DISK MENU:
ENABLE DISK ID
MAIN/DISK MENU:
DISK NOTES
MAIN/DISK MENU:
CLONE RADAR DISK
MAIN/DISK MENU:
24 TRKS AT 192K
MAIN/DISK MENU:
SEAMLESS 64K