www.izcorp.com • 1.800.776.1356
A CREATING XXXX.IMG IS O FILE background window will appear at the bottom of
RADARView indicating the progress of the ISO image creation.
A DISK IMAGES folder is automatically added to the internal system drive the first time an
.IMG file is created. Subsequent .IMG files will be stored in the same folder.
This process works in the background and the RADAR
can be returned to normal use
during this operation.
Use the , the and keys and the key to go to the MAIN MENU / FILE
MENU / BURN DATA CD/DVD selection and press the key.
Press the key at the BURN TO: B: CD-R BLANK or B: DVD BLANK prompt.
At the SELECT DVD IMAGE prompt, use the and keys to navigate to the .IMG file to
burn and press the key.
At the XX.IMG PROCEED? NO YES prompt, verify that this is the image file to burn by selecting
YES and pressing the key. The burning process will begin and cannot be stopped until the
image is written and the media finalized.
A background window will appear at the bottom of RADARView indicating the burn
progress. During the finalizing process, the taskbar doesn’t indicate progress but may take
up to 15 minutes to complete. Finalizing time is dependant on the image file size and
media format (DVD-R or CD-R). It is safe to continue working with RADAR while the DVD-
R or CD-R image is written and finalized.
BURN AN AUDIO CD
With a multi-drive installed, one or more stereo exports can be burned as a Red Book CD-DA file that can
be played in any CD player. RADAR will automatically convert the audio to 16 bit/44.1 KHz when
selecting CDAUDIO at the FILE FORMAT: dialogue during an export. The quality of the conversion is
based on the REFORMAT QUALITY option under the FILE MENU / FILE PREFS.
To set the REFORMAT QUALITY preference:
a. Use the , the and keys and the key to go to the MAIN MENU /
FILE MENU / FILE PREFS / REFORMAT QUALITY selection and press the key.
b. At the REFORMAT QUALITY: prompt, use the and keys to select Q1, Q2 or Q3
and then press the key.
To Next Page
Loading...
