iZ Technology Corporation
Only projects that don’t contain edits (e.g., paste, erase, loop, etc), can be flattened.
EXPORT or use BWAV backup to the Audio Recording Drive for the same functionality
as file flattening. The drive can be mounted on a Mac or PC and the files will be in its own
project folder in the user directory.
Do not export to a flattened project’s folder in the USER directory. Within the USER
directory create a new folder called EXPORTS and export to this folder.
EXPORT
RADAR has the capability of exporting Wave, Broadcast Wave or Red Book (CD Audio) files or pieces of
files (clips) to a variety of destinations. These include D:ARCHIVE (RADAR internal system drive
partition), N:NETWORK a shared folder on a network, E:USB DRIVE (formatted as FAT32), DVD-RAM,
DVD-R, CD-R, HFS (Mac OS Standard) and FAT32 formatted drives.
To create a Red Book audio CD select EXPORT directly to the CD as a one-time burn or choose to
FINALIZE later consequently allowing one to add additional tracks over time before closing (finalizing)
the CD. Another option is to EXPORT STEREO CDAUDIO files to a folder on the internal IDE system
drive (e.g., D:ARCHIVE). This folder can be used to store CDAUDIO files as the source for burning and
finalizing an audio CD.
Exporting for the purpose of creating an audio CD requires selecting STEREO as the export format in
order to access the CDAUDIO option. Also, if the project being exported has a sample rate and/or bit
resolution other than 16 bit/44.1kHz, there will be an option to select a RESAMPLE QUALITY. The three
Q settings determine the speed and quality of the conversion with Q3 representing the slowest speed but
highest quality.
There are two ways to initiate a file export from the RADAR:
• Using the EXPORT MENU, which is available using both the Session Controller and the
KC-24.
• Using the or keys on the Session Controller.
To export one or more files (tracks):
First, choose a project to export from as the current project. Use the key to load the
project.
Press the key or use the , the and keys and the key to go to the
MAIN MENU / FILE MENU / EXPORT selection and press the key.
At the EXPORT: dialogue, use the and keys to select MONO or STEREO and press the
key.
To Next Page
Loading...
