www.izcorp.com • 1.800.776.1356
At the FILE FORMAT: dialogue, use the and keys to select WAV, BWAV or CDAUDIO
(CDAUDIO will only be available if STEREO was selected in the previous step) and press the
key.
To set the default as WAV or BWAV when exporting, change the FILE FORMAT preference.
This will bypass the prompt when files are exported.
To set the file format preference:
a. Use the , the and keys and the key to go to the MAIN MENU /
FILE MENU / FILE PREFS / EXPORT FORMAT selection and press the key.
b. At the FILE FORMAT: prompt, use the and keys to select WAV or BWAV and then
press the key. The factory default setting is ASK.
If selecting WAV or BWAV, skip to step 7.
If selecting CDAUDIO and the project sample rate and/or bit resolution is NOT 16 bit/44.1kHz, it
will prompt with a REFORMAT QUALITY dialogue. Use the and keys to select Q1, Q2 or
Q3 and press the key.
To set the REFORMAT QUALITY preference:
a. Use the , the and keys and the key to go to the MAIN MENU /
FILE MENU / FILE PREFS / REFORMAT QUALITY selection and press the key.
b. Use the and keys to select Q1, Q2 or Q3 and then press the key. The factory
default setting is Q3.
Q3 represents the slowest speed but highest quality.
If the FILL SILENCE preference is set to ASK, a FILL SILENCE option will have to be chosen
for each WAV/BWAV export or BWAV backup. If CDAUDIO is selected then all silence will be
filled automatically in the selected audio.
To set the FILL SILENCE preference:
a. Use the , the and keys and the key to go to the MAIN MENU /
FILE MENU / FILE PREFS / FILL SILENCE selection and press the key.
b.
At the FILL SILENCE prompt, use the and keys to select:
ASK Will prompt for fill silence option each export/BWAV backup.
FILL GAPS ONLY FILL ALL GAPS without front or back fill.
FRONT FILL+GAPS FRONT FILL and FILL GAPS without BACK FILL.
GAPS+BACK FILL BACK FILL and FILL GAPS without FRONT FILL.
FRONT+GAPS+BACK FRONT and BACK FILL and FILL GAPS
NO Each export/BWAV backup will transfer with no fill options
Make a selection and press the key. The factory default setting is ASK.
To Next Page
Loading...
