iZ Technology Corporation
SHOW DISK SPACE
This menu item displays the remaining recording time left on the currently mounted recording drives in the
hours, minutes and seconds format. This information is also available on the RADARView display but the
calculated recording time remaining is displayed in minutes. These values are “track minutes”; in other
words, the displayed time will vary depending on the number of tracks selected using the track arming
keys.
To calculate the remaining time for a given number of tracks:
Press the Track Arm keys to select the number of tracks to be used in the remaining time
calculation.
Consult the REC TIME display on the bottom right of RADARView to view the minutes remaining
or use the , the and keys and the key to go to the MAIN MENU / DISK
MENU / SHOW DISK SPACE dialogue and press the key to view the same information in
the hours, minutes and seconds format.
SHOW DISK SPACE can also be displayed by simultaneously pressing the and
keys on the Session Controller or the KC-24.
To display the remaining space in megabytes, hold and press then BROWSE to
the appropriate drive and press the ( key on the KC-24).
RECLAIM SPACE
The RECLAIM SPACE function frees up disk space by deleting “orphaned” audio files that are no longer
referenced by any RADAR project play list. There is also an additional option that allows the user to keep
or delete any audio files that are referenced in the current undo lists.
RADAR also has an AUTO RECLAIM feature. This feature differs from RECLAIM SPACE in that it only
frees up orphaned files in a particular project. In other words it will not delete any audio files that were
previously shared between projects. RECLAIM SPACE is a global function that will examine all projects
and delete any audio files that are no longer in use for any reason. AUTO RECLAIM is enabled by
default and works automatically in the background to ensure the most efficient use of disk space. It can
be disabled in the MAIN MENU / PREFERENCES MENU / AUTO RECLAIM dialogue.
To reclaim disk space:
Before reclaiming space ensure every project on the recording drive is backed up. RECLAIM
SPACE is a global disk function and may affect audio in projects other then the current project.
Use the , the and keys and the key to go to the MAIN MENU / DISK
MENU / RECLAIM SPACE dialogue and press the key.
To Next Page
Loading...
