iZ Technology Corporation
RESTORE
To restore a RADAR project
:
Press the key on the Session Controller or use the , the and keys and
the key to go to the MAIN MENU / FILE MENU / RESTORE selection and press the
key.
At the RESTORE FROM: dialogue, use the and keys to select the device to restore from
and press the key. This list will include D:ARCHIVE (RADAR internal system drive
partition), N:NETWORK, B: (DVD-RAM, DVD-R, BD-RE or CD-R), REV DISK, E:USB DRIVE
and SCSI backup drives connected to the RADAR.
Use the and keys to select the folder containing the backup(s) to restore and press .
Use the and keys to select ALL or SELECTED from the restore menu and press .
With the SELECTED option use the and keys in conjunction with the and keys on
the numeric keypad to add or remove individual projects from the restore list.
Press the key. If the restore cannot fit into the remaining disk space, the prompt will alert
AUDIO DRIVE FULL.
When the restore is complete the display will read RESTORE COMPLETE PRESS ANY
BUTTON.
To cancel a restore at any time press the key. When canceling a project that is
partially restored there will be the option to SALVAGE PARTIAL PROJECT. Choose NO
for RADAR to automatically reclaim the disk space.
After you have finished using a USB drive, make sure you unmount it before unplugging it
from RADAR. You can access the MOUNT/UNMOUNT dialog via the DISK MENU or by
pressing + UNMNT on the Session Controller.
FLATTEN PROJECT
When initializing the recording drive for AUDIO:RADAR_BWAV, the drive will now be compatible with
any Mac or PC computer. To access the audio from a mounted RADAR BWAV drive on a Mac or PC
select FLATTEN PROJECT in the FILE menu. This function consolidates all of the punch ins into
continuous files and puts them into a user folder that is easily accessed from a Mac or PC.
To flatten a project on a RADAR_BWAV disk:
Use the , the and keys and the key to go to the MAIN MENU / FILE
MENU / FLATTEN PROJECTS dialogue and press the key.
To Next Page
Loading...
