iZ Technology Corporation
Press the key to resume normal operation.
To check a DVD-RAM or BD-RE disk in the multi-drive, select YES to check DISK B.
REPAIR DISK
The REPAIR DISK function will correct any inconsistencies that were found in the FAT and/or directory
structure on the selected disk after using the CHECK DISK function. If experiencing technical issues
please call iZ Support at 1-800-776-1356 or email us at support@izcorp.com before using this feature.
Using this feature could result in audio data being lost - exercise caution.
To repair a SCSI or SATA disk:
Use the , the and keys and the key to go to the MAIN MENU /
DIAGNOSTICS MENU / REPAIR DISK dialogue and press the key.
Use the and keys to select the SCSI ID that corresponds to the drive and press the
key.
Select YES at the REPAIR DISK X? prompt to confirm and press the key.
The disk will be un-mounted and re-mounted and a report will be generated and displayed in the
DISK ERRORS: dialogue. To view the details, use the and keys to scroll through the list.
This information will be stored in the debug file that can be saved and sent to iZ Technical
Support if required. See OPERATIONS: DISK DIAGNOSTICS: RADAR DEBUG for more details.
Press the key to resume normal operation.
To repair a DVD-RAM or BD-RE disk in the multi-drive, select YES to repair DISK B.
To Next Page
Loading...
