iZ Technology Corporation
The changing sector address display and the percentage indicator on both the Session
Controller and the RADARView display will indicate this function’s progress. Any errors will be
displayed as they are encountered.
If errors are detected during the verify this indicates that RADAR is unable to read and/or write to
one or more sectors of the hard drive. If encountering errors, it is recommended to backup all the
data on the defective drive and replace it. This will avoid any problems during a critical recording.
Press the key to resume normal operation.
RADAR DEBUG
RADAR creates a new debug log every time it is turned on. This log contains a significant amount of user
and system information and is very useful when diagnosing a problem with the RADAR.
During the operation of the RADAR, the debug log can be displayed in RADARView by holding the
key down and pressing the key. This will switch the waveform view to a text view displaying the
debug lines. To scroll through the debug line by line, hold the key down and press the and
keys. To scroll through the debug page by page, hold the key down and press the and keys.
Hold the key down and then press the key to return to the waveform view.
CONFIGURE DEBUG
The CONFIGURE DEBUG dialogue has options to filter the data that is output to the DEBUG files. This is
provided to isolate problems on the RADAR
by filtering out unnecessary data.
The available filtering options are:
SYSTEM
Include or exclude system data (default set to yes).
SCSI
Include or exclude SCSI data.
LIN:020K Set the maximum number of lines in the debug file. The default setting is 20,000 lines.
SYNC
Include or exclude sync data.
To configure the debug output:
Use the , the and keys and the key to go to the MAIN MENU /
DIAGNOSTICS MENU / CONFIGURE DEBUG dialogue and press the key.
Use the and keys to move between the fields and the and keys to change the
field’s value. Selecting Y for a filtering field includes that data in the debug file output.
Press or to resume normal operation.
SYSTEM:Y SCSI:N
LIN:020K SYNC:N
To Next Page
Loading...
