www.izcorp.com • 1.800.776.1356
To enable and disable instant RECORD via the Track Arm keys:
Use the , the and keys and the key to go to the MAIN MENU /
PREFERENCES MENU / RECORD PREFS menu selection and press the key.
Use the and keys to select TRACK ARM ACTION and press the key.
Use the and keys to select either READY or RECORD and press the key.
RECORD MK IN/OUT
This preference allows the MK IN/OUT locate points to be constantly updated to the last record drop-
in/out. This can be especially useful during overdubs as it provide a very fast playback method of the last
punch. Once an overdub is finished, simply press the key to audition the performance.
To enable and disable RECORD MK IN/OUT:
Use the , the and keys and the key to go to the MAIN MENU /
PREFERENCES MENU / RECORD PREFS menu selection and press the key.
Use the and keys to select RECORD MK IN/OUT and press the key.
At the UPDATE MK IN/OUT ON RECORD: dialogue, use the and keys to select either
NO or YES and press the key.
LOW DISK WARNING
This preference determines the amount of recording minutes, based on your current project sample rate,
bit depth and number of tracks armed, remaining in order to produce the LOW DISK WARNING.
To set the threshold for the LOW DISK WARNING:
Use the , the and keys and the key to go to the MAIN MENU /
PREFERENCES MENU / RECORD PREFS menu selection and press the key.
Use the and keys to select LOW DISK WARNING and press the key.
At the LOW DISK LEVEL WARNING: dialogue, use the and keys to set the number of
recording minutes remaining and press the key. The factory default setting is 05 minutes.
To Next Page
Loading...
