www.izcorp.com • 1.800.776.1356
If using CIFS: Enter the unique shared folder name
found on the server/computer RADAR is connecting to.
This is a case sensitive parameter.
If using CIFS: Enter the client workgroup of the
server/computer RADAR is connecting to.
The following email preferences are for designating the
reply information when emailing debugs directly from the
RADAR.
Enter the company name to be included with all emailed
debug logs.
Enter the location name to be included with all emailed
debug logs.
Enter the reply email to be included with all emailed
debug logs.
This preference allows RADAR to be controlled over
Ethernet via RNC (RADAR Network Control) software.
The RNC program allows control of one or more RADAR
machines over the Ethernet using a standard PC
computer running Windows 98, NT, 2000. XP, or Vista.
This preference allows RADAR’s COM port settings to be
modified.
This preference allows the COM port for the Session
Controller to be designated. The REMOTE PORT can be
set to COM1 , COM2, or BOTH.
EMAIL PREFS:
REPLY EMAIL
EMAIL PREFS:
LOCATION
EMAIL PREFS:
COMPANY NAME
NETWORK PREFS:
EMAIL PREFS
REMOTE PORT:
COM1 COM2 BOTH
MAIN/PREFS MENU:
REMOTE PREFS
NETWORK PREFS:
NETWORK CONTROL
SERVER PREFS:
CLIENT WORKGROUP
SERVER PREFS:
SERVER SHARE
To Next Page
Loading...
