iZ Technology RADAR - Page 117

www.izcorp.com • 1.800.776.1356
OPERATIONS
RADAR 3.50
110
At the NAME TEMPLATE: prompt enter a name and press the key.
At the SELECT TEMPLATE: prompt use the and keys to choose YES or NO and press the
key.
Select previously created template:
Use the MAIN MENU / FILE MENU / FILE PREFS / FILE NAME FORMAT / CUSTOM /
SELECT TEMPLATE and press the key.
At the SELECT TEMPLATE: prompt use the and keys to select a template and press the
key.
To export a template to be used on another RADAR:
Go to the MAIN MENU / FILE MENU / FILE PREFS / FILE NAME FORMAT and press the
key.
Use the and keys, select CUSTOM and press the key.
At the CUSTOM FORMAT: prompt use the and keys, select EXPORT TEMPLATE and
press the key.
At the EXPORT TEMPLATE prompt choose ALL TEMPLATES or SELECT TEMPLATES and
press the key. If selecting ALL TEMPLATES skip to step 5.
If choosing SELECT TEMPLATES use the and keys to select templates and the to
mark them to be exported. Once the desired templates are selected press the key.
At the EXPORT TO: prompt use the and keys to select the device to save to, and press
the key. This list will include D:ARCHIVE (RADAR internal system drive partition),
N:NETWORK, A:FLOPPY, B: (DVD-RAM, DVD-R, BD-RE or CD-R), REV DISK, E:USB DRIVE
and any FAT32 or HFS Standard formatted SCSI drives connected to the RADAR.
After you have finished using a USB drive, make sure you unmount it before unplugging it
from RADAR. You can access the MOUNT/UNMOUNT dialog via the DISK MENU or by
pressing + UNMNT on the Session Controller.
To import a template from another RADAR:
Go to the MAIN MENU / FILE MENU / FILE PREFS / FILE NAME FORMAT and press the
key.
Use the and keys, select CUSTOM and press the key.
At the CUSTOM FORMAT: prompt use the and keys, select IMPORT TEMPLATE and
press the key.