iZ Technology Corporation
EDITING KEYS
The editing keys provide direct access to the most commonly used functions contained in the EDIT
MENU.
The UNDO function will undo the last record or editing operation. For details
refer to OPERATIONS: RECORDING: UNDO/REDO.
The REDO function will redo the last record or editing operation. See
OPERATIONS: RECORDING: UNDO/REDO for further information.
The LISTEN function allows the audition of audio currently stored on the
clipboard. For details see OPERATIONS: EDITING: EDITING FUNCTIONS.
The CUT function removes a defined track-region from the project timeline
and creates a duplicate of the defined track-region on the clipboard. For
further information see OPERATIONS: EDITING: EDITING FUNCTIONS.
The COPY function moves a duplicate of a defined track-region to the
clipboard. For further information see OPERATIONS: EDITING: EDITING
FUNCTIONS.
The PASTE function places a copy of the audio currently stored on the
clipboard into the project at the specified paste point. See OPERATIONS:
EDITING: EDITING FUNCTIONS for details.
The MOVE function repositions the audio defined by the selected track-region
and prompts to enter a new destination in the HH:MM:SS:FF format. For
more information please refer to OPERATIONS: EDITING: EDITING FUNCTIONS.
Use ERASE to eliminate audio without affecting post-edit audio on the project
timeline. See OPERATIONS: EDITING: EDITING FUNCTIONS: ERASE for further
information.
The SLIDE function repositions the audio defined by the selected track-region
and uses frames or millisecond to provide a way to easily nudge audio
regions. For more information please refer to OPERATIONS: EDITING: EDITING
FUNCTIONS.
The LOOP function automatically pastes multiple copies of a track-region
using the MARK OUT point as a starting reference. Refer to OPERATIONS:
EDITING: EDITING FUNCTIONS for details.
The MODIFY EDIT function allows quick and easy fine-tuning of the current
edit. For details refer to OPERATIONS: EDITING: EDITING FUNCTIONS.
To Next Page
Loading...
