iZ Technology Corporation
Version 3.54
3.54 MANUAL ADDENDUM
INSTRUCTIONS
_______________________________________
This addendum provides changes and additions to the 3.50 Operator’s Manual for all RADAR products.
Note the following regarding this addendum:
• A 3.54 ADDENDUM TABLE OF CONTENTS is provided. Insert this page after the last page of the
TABLE OF CONTENTS in the PREFACE section of the 3.50 Operator’s Manual for quick reference to
new and changed features for RADAR.
• Headers at the top of each page indicate the release in which the feature was changed/added.
Only print pages with versions released since the RADAR was last updated.
• Page numbers for the corresponding section of the 3.50 Operator’s Manual are located at the
bottom of each page to allow for insertion in the appropriate section of the manual. The –
(hyphen) and number after the page number indicates a page addition.
• A new MENU TREE OVERVIEW for the 3.54 software is also provided. Use these pages to replace
the existing MENU TREE OVERVIEW in the 3.50 Operator’s Manual.
• Alternatively, insert this addendum after the ADDENDUMS tab located at the back of the 3.50
Operator’s Manual binder.
To Next Page
Loading...
