www.izcorp.com • 1.800.776.1356
Mac IP Address setup:
Open SYSTEM PREFERENCES and then click on NETWORK.
At SHOW, select BUILT IN ETHERNET and select the TCP/IP tab.
At CONFIGURE IPV4: choose MANUALLY.
On IP ADDRESS enter a unique IP ADDRESS (i.e. 192.168.1.2).
For SUBNET MASK enter: 255.255.255.0
Click APPLY NOW button.
Mac FTP Server setup:
Open SYSTEM PREFERENCES.
Click on SHARING.
Click on the SERVICES tab.
Click on the FTP check box.
Click on the FIREWALL tab.
Click the STOP button.
The Mac will use the Mac user account login short name and password for FTP access.
Mac FTP Server Username and Password:
Open SYSTEM PREFERENCES.
Click on ACCOUNTS.
The FTP USER NAME is the MY ACCOUNT’S, SHORT NAME.
The FTP USER NAME is the MY ACCOUNT’S, PASSWORD.
RADAR FTP client setup:
Use the key, the and keys and the key to go to MAIN/PREFERENCES
MENU/NETWORK PREFS/SERVER PREFS and press the key. Press the key
again on NETWORK PROTOCOL
At the NETWORK PROTOCOL: prompt, press the key on FTP.
At the SERVER IP ADDR: prompt, use the numeric keypad and the and to enter the
Mac’s server IP address and press the key. (i.e. 192.168.1.2)
To Next Page
Loading...
