9.2.2 WorkBench Installation
This chapter describes the installation of the WorkBench software for AKD2G drives.
Kollmorgen offers training and familiarization courses on request.
9.2.2.1 Use as directed
With the software to set up your drive you can alter and save the operating parameters for the AKD2G series of
drives. The attached drive can be set up with the help of this software. During this procedure the drive can be
controlled directly by the service functions.
Only professional personnel who have the relevant expertise (➜ # 15) are permitted to carry out online parameter
setting for a drive that is running.
Sets of data that have been stored on data media are not safe against unintended alteration by other persons. The
use of unchecked data can result in unexpected movement. After loading a set of data always validate parameters
which are relevant for the application before enabling the drive.
AKD2G-S Installation Manual, Safety 1
Kollmorgen | kdn.kollmorgen.com | June, 2023 167
To Next Page
Loading...
