AKD2G-S Installation Manual, Safety 1 | 6 Technical description and data
6.8 SD Card Slot
AKD2G contains an SD card slot
l
to recover the drive from failure and
l
to backup and restore firmware and parameters and
l
to store AKD2G logs.
These features can be accessed from the drive display using push-buttons B1/B2.
Supported SD card types
SD cards are formatted by the manufacturer. The following table outlines the SD card types and AKD2G support.
SD Type File System Capacity Supported
SD (SDSC) FAT16 1MB to 2GB YES
SDHC FAT32 4GB to 32GB YES
SDXC exFAT (Microsoft) >32GB to 2TB NO
Features
Refer to the WorkBench online help for complete information.
l
To recoverAKD2G from an SD card:
Remove 24V. Press the buttons B1 and B2 to apply 24V. Release buttons after the display is updated.
l
Backup/Restore operations:
Only possible when no program is running and the drive is disabled.
Note that if a fault occurs during Backup/Restore operations, the fault number shows up in the display, error
codes (➜ # 177).
l
Drive Firmware Backup/Restore
l
Drive Parameters Save/Restore
l
Storing drive logs
l
Storing drive troubleshooting information in case of failure.
l
Drive recovery in case of failure.
46 Kollmorgen | kdn.kollmorgen.com | June, 2023
To Next Page
Loading...
Need help?
General
